JennAir Microwave F6E2 Error Code

Reading F6E2

Few words are spent on this one. JennAir’s help site lists a possible problem with the main oven temperature sensor, the oven appliance manager or the wiring of a built-in microwave. No trigger is named and neither is a symptom. The entry is one sentence and a reset, and it never divides the sensor, manager and wiring into separate checks.

Owner steps

1. Turn the breaker off and count to sixty.
2. Turn it on.
3. Look at the display for a minute; F6E2 should not come back.

Nothing else is suggested for owners.

Please do not open it

Checking inside for a loose sensor lead is not what JennAir asks owners to do. Electrical parts in a built-in should be left for a technician.

Why the page stays short

The JennAir wording gives a suspect list and a reset and there is little else to report on F6E2.

Code still shows

Arrange a visit. Which of the three suspects is responsible gets sorted out by testing. Mention F6E2 and the fact that it reappeared after the breaker reset.

F6E2 versus F6E1

Parts are the same; only F6E1 adds the remark about many possible reasons.

Same suspects elsewhere

• F6E1: includes the remark.
• F6E0: built-in version has this pair of parts also.
• F6E6: points at the manager control alone.

Los Angeles repair contact

Call (310) 622-9465 and keep the code plus your reset result ready. See our microwave repair page.

Source: JennAir Product Help, Built-In Microwave