JennAir ties F1E1 to the Control Module. Remove power for 30 seconds; if the code returns, schedule service.
Model compatibility: JennAir reuses codes across series and model years, so F1E1 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
The potential cause JennAir gives for F1E1 is the Control Module.
A brief entry
JennAir’s dishwasher help gives F1E1 exactly one potential cause: the Control Module. It adds no symptoms, no hose or filter check, and no cycle advice. That keeps the path to a fix short.
Control module in everyday terms
Think of it as the dishwasher’s electronic brain: it interprets button presses and runs the wash program. JennAir does not say how it fails.
Restart the electronics
JennAir draws a parallel with rebooting a computer, because losing power can sometimes clear a fault. The control has to sit without power for 30 seconds.
Dishwasher with a plug: pull it from the outlet, count 30 seconds, push it back in.
Dishwasher wired in: flip its breaker off at the service panel, count 30 seconds, flip it on.
Where it goes from there
JennAir closes the entry by telling you to schedule service if the error returns. Opening the control area or swapping parts is not something to attempt, as it is wired to household power. If the code stays gone after the reset, just remember to report it should it ever come back.
Other codes in the control family
F1E2 / F2E2 speak of a communication error at the main control.
When F1E1 outlasts the reset, call (310) 622-9465. It helps to know the code, whether the unit is plugged in or hard-wired, and that the 30-second power cycle was done. Our dishwasher repair page has more.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your JennAir appliance?
Book a specialist visit for a clear estimate and approval before any repair.
