Skip to content
Specialist JennAir Appliance Repair in Los Angeles
Error Code

JennAir Dishwasher F6E1 Error Code

Book a Repair (310) 622-9465
Published September 2, 2026 Updated October 17, 2026

Content status: Verified

Error code F6E1
Appliance Dishwasher
Quick answer

JennAir lists F6E1 as a user interface error with the main control. Reset the power; service if the code remains.

Model compatibility: JennAir reuses codes across series and model years, so F6E1 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

JennAir lists F6E1 as a user interface error involving the main control.

Reading F6E1

JennAir labels F6E1 as a User Interface Error, Main Control. The trouble lies in the connection between the part you look at and press and the control board running the cycle.

The manufacturer’s advice amounts to two moves: reset the power, and if the code is still showing afterward, call. JennAir offers the analogy of what people do with a computer that acts up.

Resetting power

  1. Detach the dishwasher from its source of power.
  2. Leave it for the full 30 seconds.
  3. Restore power: push the plug in on a cord-connected model, or flip the breaker at the service panel on for a hard-wired one.
  4. Look at the display.

A code that stays

Staying put after the reset is the cue for a service call. JennAir lists no other step for owners. The interface and control are behind a panel carrying line voltage, so trim and screws should stay in place.

Owner questions

Will button presses clear it?
JennAir lists no button sequence for F6E1. Only the power cycle applies.

Is the control completely dead?
Not stated. The page links the interface and main control to the error and goes no further.

Related user-control codes

  • F2E1 means a key is stuck or the console has a fault.
  • F1E2 / F2E2 mean the main control lost communication.
  • F1E1 names the Control Module outright.

Dishwasher repair for JennAir in Los Angeles

If F6E1 keeps coming up, call (310) 622-9465 and say you tried the 30-second reset. See also dishwasher repair.

Source: JennAir Product Help, Dishwasher error codes and flashing lights

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your JennAir appliance?

Book a specialist visit for a clear estimate and approval before any repair.

Request Repair (310) 622-9465

Ready to get your JennAir appliance working again?

Book a repair online or call us — clear estimates and approval before any repair work begins.

Request Repair (310) 622-9465
Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Phone (310) 622-9465
Email info@jennairlosangeles.support
Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Los Angeles & Orange County

Request your repair

Use the secure scheduler below to request your appointment.

Call Book a Repair