JennAir Dishwasher F4E2 Error Code

Little detail, one subject

On JennAir’s list, F4E2 stands for trouble with the heating system. That sentence is the whole cause statement: the page offers no part names, temperatures or description of symptoms.

What to do, in order

1. Cut power for 30 seconds. A cord-connected dishwasher is unplugged and plugged in again; a wired-in one has its breaker flipped off and on at the service panel.
2. Put the dishwasher to use again.
3. Schedule service if F4E2 shows again.

Notes worth taking for the call

The page is so short that your own observations matter: were the dishes warm or cold afterward, did the cycle run to its normal length, did the code come early or late? None of this originates with JennAir, but jotting it down costs nothing.

A word on heat

With the heating system named, general cautions apply. Hot water and hot parts can scald or burn, so allow the dishwasher to cool before opening it after a cycle that ended on this code. Stay out of the panels and wiring. JennAir recommends nothing past the reset, which leaves deeper checks to a technician.

F4E2 next to its neighbour

• F4E2: Heating System; first step is the 30-second power cycle.
• F4E3: Heating Error; the same first step.

The two entries are worded differently, so each gets its own page, and the source does not say how they differ. F3E2 is the sensor-related code in the vicinity.

JennAir dishwasher repair, Los Angeles

When F4E2 returns after the reset, call (310) 622-9465 and report the code plus the power cycle you did. The dishwasher repair page explains more.

Source: JennAir Product Help, Dishwasher error codes and flashing lights