Published September 2, 2026Updated October 17, 2026
Content status:
Verified
Error codeF2E2
ApplianceWall Oven
Quick answer
How long to cut power for F2E2 depends on the JennAir product: five minutes or one.
Model compatibility: JennAir reuses codes across series and model years, so F2E2 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
F2E2 is a possible keypad, control or wiring fault, and JennAir lists a power reset whose length depends on the product.
With F2E2, the main variable is the length of time the power stays off. JennAir publishes two lengths, and one of the pages states no cause at all.
Commercial-style range: disconnect for 5 minutes and then reconnect; no cause stated.
Range, wall oven, built-in microwave: breaker off for 1 minute and back on; the keypad or user interface, control, or wiring is named.
On the commercial-style range
JennAir likens this reset to rebooting a computer, saying it can occasionally clear a control problem. For a range on a plug, pull it out of the outlet for five minutes and reinsert it. Without a plug, the breaker is switched off for the same period. Beyond that, the page offers no reason for F2E2.
On every other product
These pages name a possible fault with the keypad or user interface, the control, or the wiring that connects them. Switch the breaker off for a minute, restore it, and watch the display for a minute while testing the oven.
Q and A
Why two different lengths? The commercial-style range page calls for a longer disconnect. Other pages say one minute. Follow the page that fits your product.
Is there a cause for the commercial range? None. Only the power cycle is given.
If it will not clear
Neither page goes beyond the reset. Rather than taking the control panel apart, arrange a repair.
Close relatives
F2E1 includes a check for a stuck button and for grates.
An F2E2 that lingers can be reported at (310) 622-9465; just say which of the two reset lengths you tried. Our range repair information is on the site as well.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your JennAir appliance?
Book a specialist visit for a clear estimate and approval before any repair.
