Skip to content
Specialist JennAir Appliance Repair in Los Angeles
Error Code

JennAir F2E0, F2E3, F2E4, F2E5, F2E6 Error Codes

Book a Repair (310) 622-9465
Published October 17, 2026

Content status: Verified

Error code F2E0 / F2E3 / F2E4 / F2E5 …
Appliance Wall Oven
Quick answer

F2E0 and F2E3 through F2E6 are explained identically by JennAir: keypad, control or wiring.

Model compatibility: JennAir reuses codes across series and model years, so F2E0 / F2E3 / F2E4 / F2E5 … may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

JennAir gives F2E0, F2E3, F2E4, F2E5 and F2E6 the same explanation: a possible user interface, keypad, control or wiring fault.

Seeing an F2E on a JennAir range, wall oven or built-in microwave display with a final digit of 0, 3, 4, 5 or 6? The manufacturer words every one of those the same way on all three help pages.

  • F2E0 to F2E6 (minus 1 and 2): user interface or keypad, the control, or the wiring.
Code Listed cause
F2E0 Keypad or user interface, control, wiring
F2E3 Identical
F2E4 Identical
F2E5 Identical
F2E6 Identical

F2E1 and F2E2 get extra notes on certain products, which is why each has a separate page of its own.

In everyday terms

The keypad or user interface is what you press when programming the oven. Behind it sits the control, an electronic part, and wiring links the pair. JennAir calls each of these a possibility and never narrows the list.

The manufacturer’s reset

  1. Switch the breaker or breakers for the oven off and wait 60 seconds.
  2. Switch them on.
  3. Wait a minute and see whether the display shows the same code.
  4. Use the oven.

Nothing more to try

No further owner checks are published. With the control and its wiring among the suspects, anything beyond the reset should be left to a technician.

Where to look next

  • F2E1 adds stuck-button and grate notes to the same keypad entry.
  • F2E2 carries a five-minute power disconnect for the commercial-style range.
  • 1C1C and 1C2C make up another keypad group.

Does the last digit matter?

When describing the problem, yes, quote it exactly. For JennAir’s own guidance the five digits are interchangeable.

Keypad code repair in Los Angeles

When an F2E code survives the reset, call (310) 622-9465 and read out the exact characters on the display. Our wall oven service page has more.

Source: JennAir Product Help, Ranges; Wall Ovens; Built-In Microwave

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your JennAir appliance?

Book a specialist visit for a clear estimate and approval before any repair.

Request Repair (310) 622-9465

Ready to get your JennAir appliance working again?

Book a repair online or call us — clear estimates and approval before any repair work begins.

Request Repair (310) 622-9465
Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Phone (310) 622-9465
Email info@jennairlosangeles.support
Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Los Angeles & Orange County

Request your repair

Use the secure scheduler below to request your appointment.

Call Book a Repair