Published September 2, 2026Updated October 17, 2026
Content status:
Verified
Error codeF6E6
ApplianceWall Oven
Quick answer
F6E6 appears for wall ovens, where it names the upper oven, and commercial-style ranges, where only a reset is given.
Model compatibility: JennAir reuses codes across series and model years, so F6E6 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Possible problem with the Upper Oven Appliance Manager Control or the associated wiring on a wall oven; the commercial-style range page lists a power cycle only.
Two JennAir pages include F6E6. Only the wall oven page attaches the word upper to it, and the commercial-style range page gives a reset and nothing else.
On a wall oven
The listed suspect is the Appliance Manager Control of the upper oven, or the wiring associated with it. JennAir’s reset is the breaker routine: off for a minute, back on, a minute of monitoring to see if F6E6 returns, then a check that the oven functions.
On a commercial-style range
There is no stated cause. A power cycle is all the page describes, with the range disconnected for 5 minutes to reset its control panel. Either unplug the range and reconnect it, or switch the breaker off and then on.
No position word accompanies the commercial range entry, so “upper” should not be read into it.
Control electronics and wiring remain as the suspects, and neither comes with an owner test from JennAir.
Prepare before dialing
Have the oven’s label details (model and serial), the code itself, and whether it is a single or double wall oven. If the breaker reset was tried, add the time it stayed off. Small notes like these head off a repeat call.
Wall oven service in Los Angeles
Phone (310) 622-9465, and specify which oven of the stack the code belongs to.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your JennAir appliance?
Book a specialist visit for a clear estimate and approval before any repair.
