A JennAir dishwasher showing F8E2 reports a fill valve electric error. Look at the inlet valve connection, reset the power, then call if it comes back.
Model compatibility: JennAir reuses codes across series and model years, so F8E2 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
JennAir lists a fill valve electric error behind F8E2.
What F8E2 stands for
Code: F8E2, shown on a JennAir dishwasher
JennAir’s wording: Fill Valve Electric Error
The fill valve is the part that admits water into the machine
Compared with most dishwasher entries, this one asks you to look at something first and reset afterward.
Steps listed by JennAir
Take out the drip tray and examine the inlet valve connection. There should be no leaks.
Remove power for 30 seconds. A plugged-in unit is unplugged; a hard-wired one has its breaker turned off at the home electrical panel. Then bring power back.
Should the code come back, arrange service.
About the look at the connection
All JennAir asks for is a visual check for leaks at the inlet valve connection. No torque value is given, there is no instruction to tighten anything, and the page does not interpret a leak. A wet connection is worth mentioning on the phone.
The word “electric”
The wording points to the electrical side of the valve, and JennAir adds nothing more. If the dishwasher is only reporting that it sees no water, that is a different JennAir code, H2O.
See also
F8E5 covers a fill valve stuck open and has urgent shut-off steps.
F8E4 is the code for water found in the drip tray.
A returning F8E2 after the power cycle is a reason to ring (310) 622-9465. Describe what the inlet valve connection looked like when the tray was out. Details on dishwasher work are on the dishwasher repair page.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your JennAir appliance?
Book a specialist visit for a clear estimate and approval before any repair.
