Published September 2, 2026Updated October 17, 2026
Content status:
Verified
Error codeF1E1
ApplianceCooktop
Quick answer
F1E1 means the keypad and appliance manager stopped communicating. Reset power; get service if it returns.
Model compatibility: JennAir reuses codes across series and model years, so F1E1 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Loss of communication between the user interface (keypad) and the appliance manager.
On JennAir’s electric cooktop page, F1E1 means communication was lost between the keypad (the user interface) and the appliance manager. The induction cooktop page and the commercial-range page use F1E1 as well, but neither states a cause.
Three pages, three entries
Electric cooktop: the keypad has lost contact with the appliance manager; reset at the breaker.
Induction cooktop: unexplained. Take it off power, wait a few seconds, reconnect; if the code stays, call service and quote it.
Commercial range: unexplained too. The range must stay disconnected for 5 minutes, by unplugging or by turning off the breaker, before power comes back.
The last entry is about a different appliance. It is included only so a household with a JennAir range does not cross the instructions.
Resetting a cooktop
Breaker off for a whole minute.
Breaker on.
One more minute of watching the display for F1E1.
When the display looks normal, try the controls.
Pick the version that fits your model: the minute-long breaker reset (electric page) or the short disconnect (induction page). The source never says either is wrong for the other.
What the code is saying
The keypad is what your fingers touch, and the appliance manager is the unit it reports to. F1E1 says that link dropped. A reset gives them the chance to reconnect, and if they stay apart JennAir has no further owner step, so service is next.
Similar codes
F6E0 and F6E4: the keypad and its own user interface control.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your JennAir appliance?
Book a specialist visit for a clear estimate and approval before any repair.
