Published September 2, 2026Updated October 17, 2026
Content status:
Verified
Error codeF37
ApplianceCooktop
Quick answer
A possible induction coil sensor issue. JennAir lists only a breaker reset for F37.
Model compatibility: JennAir reuses codes across series and model years, so F37 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
JennAir lists F37 as a possible problem with a temperature sensor on an induction coil.
This is a brief entry. On JennAir’s page F37 sits right after F36 and carries the identical statement, that a temperature sensor on an induction coil may be at fault.
The idea behind it
An induction cooktop warms a pan by passing a magnetic field through a coil under the glass, and a sensor on that coil tells the control how hot the area has become. JennAir writes “may”, which makes this a flagged possibility rather than a confirmed failure.
Only one thing for the owner to try
Switch off the breaker that feeds the cooktop.
Leave it off for a minute and then switch it on.
Keep an eye on the cooktop over the next minute.
Once the display has settled, try it out.
What lies past the reset
Nothing else is offered. There is no cleaning, no advice about pans and no cool-down period, which makes sense because a sensor on a coil is inside the cooktop. Deciding whether the sensor, its connection or the control is the culprit needs a technician who can get at the parts.
Since the wording is “may”, a visit is where a suspected sensor is either confirmed or ruled out.
F37 versus F36
With F37 on the display rather than F36, the same reasoning holds, since the source treats the two alike.
On a radiant model F36 has a second meaning, but F37 is never given one.
Similar codes
F36 repeats the sensor wording and adds a communication alternative.
FCE0 points to the supply, wiring or the induction module.
Induction cooktop repair in Los Angeles
If the reset does not hold, phone (310) 622-9465 to arrange JennAir induction cooktop repair in Los Angeles. Be ready to say which zones, if any, still heat, along with the code and model number.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your JennAir appliance?
Book a specialist visit for a clear estimate and approval before any repair.
