JennAir Cooktop F4 Error Code: Pan Too Close to Controls

Few JennAir cooktop codes are as gentle as F4. The message is that a pot or pan is positioned too close to the control panel.

The reason placement counts

Touch controls share the glass surface with the cooking areas. A hot pan drifting toward them heats the panel, and that is the reason JennAir wants you to be sure nothing hot is lying on the touch control panel.

What to do, in order

1. Lift the pot or pan off the cooktop.
2. Leave it for 5 minutes while the control panel clears.
3. Set the pan back down centered on the surface cooking area.
4. Make sure no hot object, a lid or spoon rest for example, rests on the touch controls.

Code still on the display

Next comes a power reset. Turn the cooktop’s breaker off for a whole minute, then on. JennAir then asks you to continue watching for one minute, to be sure F4 stays away, and to verify that the cooktop operates.

Large pans and full surfaces

The F4 entry names position as the only cause and says nothing about pan diameter. A different electric-cooktop entry, C82, does set out size limits for a pan against the element, and it is a useful read if oversized cookware is common in your kitchen.

Knowing when to stop

With a well-placed pan on a cooled cooktop, F4 should not appear. If it does, JennAir offers no more owner steps, so request service rather than cycling the breaker over and over.

Nearby panel codes

• E03 / F0 / F00 relates to objects or liquids pressing on the panel.
• F2 means the surface is too hot, and it goes away as the cooktop cools.

Los Angeles cooktop repair for F4

Where F4 shows up and nothing is near the controls, ring (310) 622-9465 to ask about JennAir cooktop repair in Los Angeles. Describe where the pan was sitting and how long you waited before resetting.

Source: JennAir Product Help, Electric Cooktop error codes