Published September 2, 2026Updated October 17, 2026
Content status:
Verified
Error codeF56 / F60
ApplianceCooktop
Quick answer
F56 and F60 mean the same thing on a JennAir cooktop: touchpad or wiring, with no board listed.
Model compatibility: JennAir reuses codes across series and model years, so F56 / F60 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
F56 and F60 are listed as a possible problem with the touchpad (user interface) or its associated wiring.
Among JennAir’s control-side codes, this pair has the shortest list of suspects. F56 and F60 each say the User Interface (touchpad) or its wiring may have a problem. The power control board, which F40 and F47 mention, does not appear here.
Reset
Run the breaker reset: switch off for a minute, then switch on. Follow with a minute of watching to see whether the code is shown again, and try each cooking area. For these two codes JennAir lists nothing else.
How the neighbours compare
Code
Touchpad
Power control board
Wiring
F56, F60
Yes
No
Yes
F40
Yes
Yes
Yes
F42, F43, F58
No
Yes
Yes
Keep this in mind while reading other pages. A code that names the board together with the touchpad has a broader reach, while F56 and F60 stay on the touch side.
Is wiping the panel worthwhile?
The entries for these codes include no cleaning, in contrast with the stuck-key code F1E0. Removing residue is harmless if the keys react strangely, though nothing on the page says it will make the code go away.
If F56 or F60 stays
A failing touchpad or a poor connection to it is a technician’s job. Resist the urge to pry at the glass.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your JennAir appliance?
Book a specialist visit for a clear estimate and approval before any repair.
