JennAir Dishwasher F7E2 Error Code

What JennAir says

For F7E2 the entry is Wash Motor Error, and the troubleshooting is short: cycle the power and schedule service if the code comes back.

A wash motor, generally speaking, is what circulates water during the wash stage. JennAir does not describe the failure, which part of the motor circuit is faulty, or how the dishwasher acts when the code shows.

The one thing worth trying

As JennAir puts it, a control reset can sometimes solve the issue, and it needs 30 seconds without power.

1. Plug-in model: pull the plug for 30 seconds, then reinsert.
2. Hard-wired model: switch off the breaker at the service panel for 30 seconds and switch it back on.
3. Try a cycle again.

Why service follows so soon

No cleaning, filter or hose step appears, because a motor error is outside what an owner can view or adjust. Schedule service if the code returns, and do not push the dishwasher into a cycle. Note whether there was water in the tub when it stopped; it assists whoever visits.

Questions that come up

Is this the drain motor?
No. JennAir assigns F7E2 to the wash motor and F9E2 to the drain motor.

Should I test with a rinse?
The page does not recommend one: reset, then service.

Related entries

• F9E2 is the drain motor code.
• F1E1 is the Control Module code.

JennAir dishwasher service, Los Angeles

For F7E2 that outlasts the reset, call (310) 622-9465 and have the code and the plug-in or hard-wired setup ready. Details: dishwasher repair.

Source: JennAir Product Help, Dishwasher error codes and flashing lights