Published September 2, 2026Updated October 17, 2026
Content status:
Verified
Error codeFCE6 / FCE9
ApplianceWall Oven
Quick answer
FCE6 and FCE9 both point a JennAir connected oven or range to the Wi-Fi Power Module, or the wiring around it.
Model compatibility: JennAir reuses codes across series and model years, so FCE6 / FCE9 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
FCE6 and FCE9 are listed by JennAir as a possible Wi-Fi Power Module or wiring problem.
On JennAir ranges and wall ovens, FCE6 and FCE9 are worded identically: a possible problem with the Wi-Fi Power Module, or the associated wiring.
Place in the FCE series
FCE1 to FCE3: router and signal.
FCE4 and FCE5: the antenna.
FCE6 and FCE9: the Wi-Fi Power Module.
FCE7 and FCE8: connecting and registering.
Seeing where the code falls spares you from resetting a router that has no bearing on it.
Recommended reset
At the circuit breaker, power the appliance down for a minute.
Switch the breaker on.
Watch for a minute to be sure the code stays away.
Check that the appliance operates.
Neither article asks you to do anything with the router.
What stays unknown
JennAir gives no further description of the fault. Whether the module itself or its wiring is responsible can only be settled by an inspection.
Still showing the code
Arrange a service visit. If you saw both numbers, report both, since JennAir treats them as the same fault. Also tell us you tried the breaker reset and how long the oven stayed free of the code afterward.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your JennAir appliance?
Book a specialist visit for a clear estimate and approval before any repair.
