Published September 2, 2026Updated October 17, 2026
Content status:
Verified
Error codeE13 / E22 / E35 / E4 …
ApplianceCooktop
Quick answer
JennAir gives nineteen induction codes a reset and nothing else. Look up your code and its reset.
Model compatibility: JennAir reuses codes across series and model years, so E13 / E22 / E35 / E4 … may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
JennAir lists these induction cooktop codes with reset steps only and gives no cause.
On the induction cooktop page, JennAir gives a whole group of codes a reset procedure and nothing more. No cause, no part, no description of the display. The codes are sorted by the reset the manufacturer prescribes.
Disconnect-and-reconnect reset: F0E2, F0E6, F0E8, F0EC, F6E1, F7E5 and F7E6.
Codes starting with E
Find the circuit breaker, or breakers, that feed the cooktop and switch them off.
Leave them off for a full minute, then switch them on.
Let the cooktop cool before you cook on it again.
Monitor it for one minute for the same code, then confirm normal operation.
Codes starting with F
These are handled another way. Take the cooktop off its power supply, give it a few seconds, and connect it again. When the code is still present, JennAir says to call the service center and report the code on the display, so jot the code down before you begin.
About F6E1
For the cooktop, JennAir lists F6E1 with only the disconnect-and-reconnect reset. The brand’s commercial-style range article also uses F6E1, where it refers to an oven that overheated during self-clean and keeps the controls locked until it cools. That belongs to a range and is not given for the cooktop.
The limit of what is known
No cause is published, so no failed board or sensor is named. A code that returns after the reset calls for a service visit, and the best thing to bring is the exact code.
F03, F13, F22: communication error in the touch control module.
F1E1: lost contact between keypad and appliance manager.
Induction cooktop service in Los Angeles
If one of these codes comes back, phone (310) 622-9465 for JennAir induction cooktop service in Los Angeles. We will want the code, the reset you tried and how long it took to return.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your JennAir appliance?
Book a specialist visit for a clear estimate and approval before any repair.
